Klingenmaterial: Werkzeugstahl 1.2842
Metallteile: Messing, ziseliert und geätzt
Griffmaterial: Riegelahorn, gebeizt
Gesamtlänge: Ca. 55 cm
Step by step: Pipe Tomahawk
Ausgangsmaterial ist ein Abschnitt Rundstahl 1.2842, mit 50mm Durchmesser.
Nach dem Schmieden des Rohlings erfolgt die erste Wärmebehandlung (Normalisieren und Weichglühen) zur Verfeinerung der Gefügestruktur des Stahls und um die Bearbeitbarkeit sicherzustellen.
Nun wird derSchmiederohling zunächst mit dem Winkelschleifer grob in Form gebracht, anschliessend werden die Details mit der Feile herausgearbeitet. Die Symetriew des Teils einzuhalten ist hier eine besondere Herausforderung.
Nach dem Härten und zweimaligen Anlassen bei 200 °C erfolgen Feinschliff und Politur von Hand. Um ein Antikes Finish zu erreichen wird das Teil anschliessend im Säurebad geätzt.
Der Stiel wird aus einem Stück abgelagertem Riegelahorn in Form gebracht und sorgfältig millimeterweise eingepasst, Die Konische Form, sowohl des Stiels als auch des Auges gewährleisten einen sicheren Halt.
Nach dem Feinschliff wird der Stiel gebeizt um die Maserung des Holzes hervorzuheben. Mit Filework verzierte Metallbeschlägen aus patiniertem Messing und die auf dem Stiel genähte Ledermanschette kompletieren den Tomahaw.
Step by step: Pipe Tomahawk
The tomahawk starts with a piece of round tool steel, 1.2842 with 50mm in diameter.
After the head is forged to its rough shape a first heat treatment (normalizing and soft annealing ) is done to refine the microstructure of the steel,
and to ensure the workability.
Afterwards the head is ground to shape using an angle grinder and latter the details are worked out by hand with files.
Keeping the piece symetrical is one of the challenges here.
After hardening and double annealing at 200°C, the surface is finished by hand sanding up to 400grit, followed by an acid bath to achieve the antique finish.
The handle is cut from a piece of tiger maple. The conical shape of the the eye in the tomahawhk-head, as well as the tapered shape of the handle ensure a secure fit.
After fine grinding the handle-wood receives a treatment with several layers of stain and woodwax to bring out its pattern. Fileworked brass parts and a leather wrap are completing the tomahawk.